When starting with 3D printing, the question of which material to choose inevitably arises. There are many on the market, but the vast majority of printers use two basic plastics on their machines. These are PLA and PETG. Both materials belong among accessible filaments for everyday use and practically do not differ in price. The differences lie in their properties and how they are handled on the printer.
The question often arises as to which of these materials is better. The answer is simple. Neither is universally better. It only depends on what exactly is expected from the finished print and where it will be used.

Basic material characteristics
Before diving into a detailed comparison, it is good to briefly introduce both materials. This will help in understanding why they behave the way they do.
PLA: The clear choice for beginners
PLA stands for polylactic acid. It is a material typically made from corn starch or sugar cane. It is one of the most widespread materials for 3D printing. For a first printer, we recommend starting with PLA. It is the easiest to print of all materials. It has minimal shrinkage, so it does not warp on the bed and does not require an enclosed print chamber. PLA prints have precise details and the surface is usually matte or glossy depending on the specific brand and printing temperature.
PETG: The universal choice for functional parts
PETG is a copolyester. The base is the well-known PET, from which plastic bottles are made, but it is enriched with glycol. This prevents the crystallization of the material during cooling and makes printing easier. PETG is tougher and more durable than PLA. It represents a suitable compromise between easy printing and mechanical resistance. For printing a part for the garage or garden, we recommend choosing PETG.
Comparison of mechanical and physical properties
Theoretical values are one thing, but real usage is another. Here is how the materials perform in common practice.
Strength and flexibility
PLA is a very hard material. If loaded statically, it can carry a significant load. Its disadvantage is brittleness. Upon impact or bending beyond a certain limit, a PLA print will break. PETG, on the other hand, is slightly softer and more flexible. Before it breaks, it bends significantly. It therefore withstands impacts and dynamic stress better. For printing a carabiner or a snap mechanism, PETG is a more suitable choice.
Temperature resistance
Temperature resistance is the main weakness of PLA. This material softens at temperatures around 60 °C. If a mobile phone holder printed from PLA is left behind a car window in the summer, it will warp and deform. PETG performs better. Its temperature resistance ranges roughly between 70 and 76 °C. It is not a material for printing engine parts, but it handles normal summer temperatures in a car or in the sun without problems.
UV resistance and outdoor use
PLA degrades outdoors over time. Sunlight and humidity cause it to become brittle and crumble. Although it takes months to years, it is not suitable for permanent outdoor use. PETG, on the contrary, excellently resists UV radiation, moisture, and common chemicals. For outdoor projects, such as sensor boxes or weather station parts, PETG is ideal.
Food contact
Questions often arise whether dishes can be printed from these materials. The plastic itself may be safe for health, but the problem lies in the 3D printing technology. Microscopic gaps form between the layers. Food residues get trapped in these grooves and bacteria multiply. They cannot be removed by normal washing. For printed cookie cutters, we recommend using them only a few times and then discarding them. For long-term food contact, the print must be treated with a specially certified epoxy.
PLA and PETG at a glance
Relative rating 1 to 5 (higher = better) based on typical values and our printing experience.
PLA softens around 60 °C, PETG roughly at 70 to 76 °C. The rating is indicative, it depends on the specific brand and settings.
How the printing process works
Printing properties divide the two materials the most. PLA will forgive many mistakes, while PETG requires more care and more precise printer settings.
Printing temperatures and settings
For PLA, we recommend setting the nozzle temperature to 190 to 220 °C. The bed can remain cold, heating is not necessary. If a heated bed is available, set it to a maximum of 60 °C to improve adhesion. No printer enclosure is needed and the print cooling must run at 100 percent. The material must solidify quickly to retain details.
PETG requires more heat. The nozzle is set to 220 to 250 °C and the bed to 70 to 85 °C. An enclosed chamber is not necessary. Print cooling for PETG is often reduced to 30 to 50 percent so the layers bond better. For printing small details or overhangs, cooling can be increased.
| Property | PLA | PETG |
|---|---|---|
| Nozzle temperature | 190 to 220 °C | 220 to 250 °C |
| Bed temperature | 0 to 60 °C | 70 to 85 °C |
| Print cooling | 100 percent | Less, typically 30 to 50 percent |
| Temperature resistance | Softens around 60 °C | Roughly 70 to 76 °C |
| Printing difficulty | Very easy | Medium |
Bed adhesion
PLA adheres to the bed very well. A clean sheet is enough and the print holds. With PETG, the situation is more complicated. This material tends to stick to a smooth PEI sheet too strongly. If printing directly on a smooth surface, a piece of the bed surface may be torn out when removing the print. For PETG, we always recommend using a textured sheet, or applying a thin layer of glue stick to a smooth sheet as a separation layer.
Stringing and moisture
PETG has a higher tendency to form thin threads when the nozzle travels. This phenomenon is called stringing. Slower retraction and above all dry filament help. PETG is more hygroscopic than PLA. This means it absorbs moisture from the air. If the spool pops, bubbles, or strings extremely during printing, the material has absorbed moisture.
Drying is the foundation of success. For drying, we recommend using a filament dryer or a food dehydrator. Using an oven is risky due to temperature fluctuations and can cause spool deformation. We dry PLA at 45 °C for 4 to 6 hours if it pops during printing. We dry PETG at 65 °C for 4 to 6 hours. After drying, we recommend storing the spools in a sealed box with silica gel.
When to choose PLA and when PETG
For clarity, we have prepared two lists that will help in choosing the right material.
Choose PLA when:
- Trouble-free printing is required for beginners.
- Printing figures, statues, or models with many details.
- Sharp edges and a perfect surface are needed.
- The print will only be indoors and will not be exposed to heat above 60 °C.
- Printing huge models where corner warping is a risk.
- A material that is easy to sand and paint is desired.
Choose PETG when:
- A mechanically durable part that can withstand impacts is needed.
- Printing items for the garden or outdoor use.
- The print must withstand summer temperatures in a car.
- Slight material flexibility is required.
- Printing functional parts such as holders, clamps, or covers.
- Adjusting retraction settings is not an issue.
Frequently Asked Questions (FAQ)
Is printing with these materials safe?
During normal printing, yes. Both materials release significantly fewer harmful substances than ABS or ASA. Nevertheless, we recommend ventilating the room with the printer regularly. More information can be found in our article on 3D printing fumes.
Can PLA and PETG be combined in one print?
These materials do not bond to each other. This can be utilized in multi-material printing, where one plastic is used as supports for the other. The supports can then be removed very easily.
Why does PETG not stick to the bed?
The most common cause is an insufficiently degreased bed or too large a distance of the nozzle from the bed. Ensure the Z offset is set correctly and the bed is clean. Do not forget the separation layer for smooth sheets.
Can PLA be used outdoors?
For a short time, yes. However, if a birdhouse is printed from PLA and left in the rain and sun, it will probably soon become brittle and fall apart. For outdoor use, we always recommend choosing PETG.
How to tell if the filament is wet?
Wet filament pops or hisses when passing through the hot nozzle. The water inside it turns into steam. The result is a bumpy print surface, holes in the walls, and heavy stringing. In such a case, only drying the material will help.